Mechanical Seal

Mechanical Seal

Mechanical Oil Seal Manufacturer

SBT is a China-based mechanical oil seal manufacturer established in 1993, specializing in the development, production, and supply of oil seals for industrial machinery and rotating equipment. Our product range includes TC, SC, TA, SA, TB, SB, and VC oil seal structures, with NBR, FKM, HNBR, ACM, VMQ, EPDM, PTFE, and other material options.

We manufacture mechanical oil seals in standard and non-standard dimensions, with customizable sealing lips, metal cases, springs, rubber compounds, and outer diameter finishes. From replacement seals for existing machinery to OEM components developed from customer drawings or samples, SBT provides manufacturing solutions based on actual equipment dimensions and operating requirements.

Mechanical Oil Seal Products for Industrial Equipment

SBT mechanical oil seals are designed to retain lubricants around rotating shafts while preventing dust, dirt, moisture, and other contaminants from entering equipment housings. The sealing assembly can combine an elastomer sealing lip, metal reinforcement, and a garter spring according to the required structure.

Our manufacturing capabilities cover:

  • Standard and custom radial shaft oil seals

  • Single-lip and double-lip oil seals

  • Rubber-covered and metal-cased oil seals

  • Spring-loaded and special lip configurations

  • High-temperature and application-specific oil seals

  • PTFE and special-compound sealing solutions

  • Non-standard oil seals developed from drawings or samples


Mechanical Oil Seal Types and Construction

SBT manufactures different mechanical oil seal profiles to match shaft dimensions, housing configurations, lubrication requirements, and contamination conditions.

TC, SC, TB, SB, TA, SA and VC Oil Seals

Seal TypeOuter CaseLip DesignMain Construction Feature
TCRubber-covered metal caseDouble lipPrimary oil sealing lip with an additional dust-exclusion lip
SCRubber-covered metal caseSingle lipPrimary sealing lip without an additional dust lip
TBExposed metal caseDouble lipRigid metal outer structure with additional contamination protection
SBExposed metal caseSingle lipMetal outer case with a primary sealing lip
TAMetal-cased constructionApplication-specificSupplied for specific housing and sealing configurations
SAMetal-cased constructionApplication-specificSupplied for specific shaft and installation requirements
VCSpecial profileProfile-dependentSupplied for specific sealing and installation requirements

SBT confirms every seal profile against your drawing or sample before production, especially for replacements of other manufacturers’ seals.

Single-Lip vs. Double-Lip Oil Seals

The number and arrangement of sealing lips affect lubricant retention and external contamination protection.

DesignConstructionSuitable Operating ConditionsDesign Consideration
Single LipOne primary sealing lip, with or without a garter springRelatively clean operating environmentsLower lip contact and friction
Double LipPrimary oil sealing lip plus auxiliary dust lipMachinery exposed to dust, dirt, and external contaminantsAdditional protection against contaminant entry
Spring-Loaded LipLip supported by a garter springApplications requiring controlled radial contact against the shaftSpring design and lip contact matched to shaft conditions
Special Multi-LipMultiple functional lipsApplication-specific sealing requirementsLip arrangement designed around fluid separation and contamination conditions

SBT can customize lip geometry, spring arrangement, and sealing profiles according to equipment drawings and operating requirements.

Rubber-Covered OD vs. Metal OD

The outer case must fit the housing bore correctly to prevent movement, bypass leakage, and installation problems.

FeatureRubber-Covered ODMetal OD
Outer ConstructionElastomer covers the outer metal caseExposed metal outer surface
Housing ContactRubber-to-housing contactMetal-to-housing press fit
Installation RequirementSuitable housing bore and compressionAccurate bore dimensions and surface condition
Typical ProfilesTC, SCTB, SB, TA, SA
Custom ProcessingRubber-covered ODGround OD, polished bright steel, coated OD, rubber-coated OD

We provide different outer diameter finishes to match housing design and installation conditions. Ground, polished, coated, and rubber-covered surfaces can be specified for customized production.

For more details about shaft sealing structures and product configurations, see our Rotary Shaft Seal products.

3.0.png


Mechanical Oil Seal Materials for Different Working Conditions

Material selection directly affects oil resistance, heat resistance, chemical compatibility, friction, and wear. SBT provides different rubber and polymer materials for mechanical oil seal production, with the final compound selected according to the actual operating medium and equipment conditions.

MaterialMaterial CharacteristicsTypical Applications
NBRGood resistance to mineral oils, lubricants, and hydraulic oilsGeneral industrial machinery, gearboxes, hydraulic equipment
FKMHigher heat resistance and broad compatibility with oils and many chemicalsHigh-temperature machinery, engines, and selected chemical environments
HNBRImproved heat, oil, ozone, and mechanical resistanceHeavy-duty machinery and demanding lubricant conditions
ACMGood resistance to hot oils and oxidationAutomotive transmissions and industrial gearboxes
VMQFlexibility across a wide temperature rangeApplications requiring low- or high-temperature flexibility
EPDMGood resistance to weathering, hot water, and steamWater and steam applications with compatible media
CRWeathering and general mechanical resistanceSelected industrial and outdoor equipment
SBRGeneral-purpose elastomer propertiesApplications with compatible operating media
FVMQSilicone-based material with specialized fluid resistanceSpecific temperature and fluid compatibility requirements
PUHigh abrasion and mechanical wear resistanceSelected heavy-duty and hydraulic sealing applications
PTFELow friction, chemical resistance, and thermal stabilityHigh-speed or chemically demanding sealing applications
FFKMSpecialized resistance to aggressive chemicals and elevated temperaturesSpecial chemical and industrial environments
AflasResistance to selected chemicals, steam, and aggressive process mediaSpecial industrial and chemical applications

NBR vs. FKM Mechanical Oil Seals

NBR and FKM are two commonly used materials for mechanical oil seals, each suited to different operating conditions.

Comparison FactorNBRFKM
Mineral Oil ResistanceGoodGood
Hydraulic Oil CompatibilityCommonly usedSuitable for compatible formulations
Heat ResistanceGeneral operating temperature rangeHigher-temperature capability
Chemical ResistanceLimited against some aggressive chemicalsBetter resistance to many oils, fuels, and chemicals
Mechanical FlexibilityGood elasticityDepends on compound formulation
CostMore economicalGenerally higher
Typical UseStandard industrial oil sealsHigher-temperature and chemically demanding applications

To recommend the right compound and quote accurately, SBT needs the lubricant type, chemical composition (if available), normal and peak operating temperatures, and service conditions.

SBT also supplies customized rubber sealing products through its rubber oil seal manufacturing range.


Mechanical Oil Seal Specifications and Dimensional Options

SBT mechanical oil seals are manufactured to match the shaft diameter, housing bore, and available installation width. A mismatch in any of these dimensions can affect lip contact, interference fit, and sealing performance.

SBT provides standard catalogue dimensions and custom manufacturing for metric and inch specifications.

Standard and Custom Size Range

ParameterStandard SupplyCustom Capability
Shaft Diameter (ID)Available catalogue dimensions4–910 mm
Housing Bore (OD)Available catalogue dimensionsCustomized according to drawings
Seal WidthStandard product widthsCustomized axial width
Measurement UnitMetric and inchMetric or inch
Dimensional ToleranceAccording to product specificationDrawing-based tolerance
Seal ProfileTC, SC, TA, SA, TB, SB, VCCustomized lip and case construction
Metal CaseCarbon steelStainless steel and selected special materials
Outer DiameterRubber-covered or exposed metalGround, polished, coated, or rubber-covered
SpringStandard spring configurationsCustomized material and spring arrangement

SBT supports custom shaft diameters from 4 to 910 mm, while standard stock covers catalogue sizes. Our engineers confirm production feasibility for each project based on seal cross-section, structure, material, and application conditions.

Oil Seal Size Identification

SBT identifies every oil seal by three basic dimensions:

DimensionDescriptionMeasurement Position
d1Inner DiameterShaft diameter
d2Outer DiameterHousing bore diameter
bWidthAxial seal installation space

For replacement orders, SBT engineers review the original seal or sample for wear and deformation, then confirm the final production dimensions with you before manufacturing.

Our Oil Seal Measurement and Identification Guide provides further reference for dimensional identification.

Sample SBT Product Specifications

ProductStructureMaterialSizeApplication
Industrial Engineering Machinery Oil SealTBNBR38 × 58 × 11 mmIndustrial machinery
TC High Pressure Oil SealTCNBR / FKM70 × 85 × 9 mmPressure-related sealing applications
CFW1 Industrial Oil SealVA / VSNBR85 × 135 × 9/20 mmGearboxes, motors, pumps, and conveyors

The table shows representative products. For other dimensions, materials, or structures, send your drawing or sample and SBT will confirm a matching solution.


Mechanical Oil Seal Operating Conditions and Engineering Selection

SBT selects each oil seal based on more than its nominal dimensions. Shaft speed, pressure, temperature, lubrication, shaft condition, and contamination all affect the sealing design.

Operating ParameterData SBT ReviewsDesign Consideration
Shaft SpeedRPM or surface speed (m/s)Lip friction, heat generation, material wear
Operating PressureNormal and peak pressure (bar or MPa)Lip support, extrusion resistance, seal structure
TemperatureNormal and maximum temperature (°C)Rubber compound and thermal stability
Sealed MediumOil, grease, fuel, hydraulic fluid, water, chemicalsMaterial compatibility and swelling resistance
Shaft RunoutRadial movement or eccentricityLip tracking and contact stability
Shaft SurfaceSurface finish, hardness, wear, and groove conditionFriction, lip wear, and leakage risk
ContaminationDust, mud, water, particles, and abrasive mediaSingle-lip, double-lip, or special protection
Housing BoreDiameter, material, surface finish, and toleranceOuter case fit and static sealing

Pressure and Speed Requirements

Standard radial oil seals and high-pressure oil seals are separate product designs. Increasing pressure or shaft speed changes the requirements for lip geometry, material, heat dissipation, and shaft contact.

For high-pressure requirements, SBT offers specific designs such as the TC High Pressure Oil Seal. Before order confirmation, our engineers check its published specifications against your required dimensions and operating conditions.

For high-speed applications, SBT evaluates shaft diameter, rotational speed, lubricant, and temperature together. Surface speed and RPM are assessed jointly rather than using RPM alone.

Shaft and Housing Conditions

The sealing lip runs directly against the shaft surface. Shaft roughness, hardness, concentricity, and wear grooves can affect the contact between the lip and shaft.

The outer diameter must also match the housing bore. A rubber-covered OD and a metal OD have different fitting characteristics, so SBT matches the original housing construction when developing a replacement.

For existing machinery, photographs of the shaft, housing, and old seal help our engineers confirm the appropriate structure.


Custom Mechanical Oil Seal Manufacturing | OEM and ODM

SBT provides OEM and ODM manufacturing for standard replacement seals, non-standard dimensions, and application-specific mechanical oil seals.

Customization covers the complete sealing assembly rather than dimensions alone.

Custom ItemAvailable Customization
DimensionsInner diameter, outer diameter, width, and dimensional tolerances
Rubber CompoundsNBR, FKM, HNBR, ACM, VMQ, EPDM, CR, SBR, FVMQ, and other selected compounds
Polymer MaterialsPU, PTFE, FFKM, and other application-specific options
Lip ConstructionSingle lip, double lip, auxiliary dust lip, and special multi-lip profiles
Metal CaseCarbon steel, stainless steel, and selected special materials
SpringSpring material, dimensions, and configuration
Outer DiameterGround, polished bright steel, coated, and rubber-covered
Product ColorBlack, brown, blue, green, red, and other selected colors
PackagingStandard or customized packaging
Product DevelopmentDrawing-based production, sample reproduction, and ODM development

OEM Oil Seal Production Based on Drawings or Samples

For replacement projects, SBT evaluates the original oil seal sample and identifies its dimensions, material, sealing lip, metal case, and spring construction.

For new OEM projects, we work from technical drawings and operating specifications. Our team reviews the design requirements before preparing samples and arranging production.

Our OEM and ODM customization service covers:

  1. Requirement analysis and application confirmation.

  2. Seal structure and material selection.

  3. Preliminary design and specification confirmation.

  4. Sample production.

  5. Sample testing and verification.

  6. Mass production after sample approval.

This process supports both replacement development and new product projects requiring non-standard sealing configurations.


Mechanical Oil Seal Applications

SBT manufactures mechanical oil seals for rotating equipment across industrial, automotive, agricultural, and construction machinery sectors.

EquipmentTypical Sealing PositionKey Sealing Requirements
Industrial GearboxesInput shafts, output shafts, bearing housingsOil retention, shaft speed, temperature
Electric MotorsMotor shafts and bearing assembliesLow friction, lubricant retention, dust exclusion
Hydraulic PumpsRotating pump shaftsFluid compatibility, pressure, shaft speed
Hydraulic MotorsDrive shafts and rotating housingsPressure, oil compatibility, wear resistance
CompressorsDrive shafts and rotating assembliesTemperature, lubrication, operating speed
Automotive TransmissionsInput and output shaftsOil resistance, temperature, dimensional fit
Wheel Hubs and AxlesHub and axle assembliesGrease retention, water and dust exclusion
Agricultural MachineryGearboxes, axles, rotating shaftsMud, dust, water, vibration
Construction EquipmentHydraulic and transmission assembliesHeavy-duty operation and contamination protection
Conveyor SystemsDrive shafts and roller assembliesDust exclusion and continuous rotation

For agricultural equipment, SBT also supplies dedicated Agricultural Oil Seals and Tractor Oil Seals for equipment-specific replacement and OEM requirements.


Mechanical Oil Seal Manufacturing and Quality Support

SBT was founded in 1993 and integrates product design, research and development, production, and processing.

Our mechanical oil seal manufacturing and supply support includes:

  • Standard and customized oil seal production.

  • Material and structure selection according to application requirements.

  • Drawing-based and sample-based product development.

  • Sample production and verification before mass production.

  • Order coordination and delivery arrangements.

  • Pre-sales technical support and after-sales service.

SBT holds ISO 9001 and ISO 14001 management-system certifications. Certification documents and their scope are available on request during supplier qualification.

For project-specific quality requirements, SBT works to the dimensional tolerances, material requirements, inspection documents, and sample approval procedures specified in your inquiry.


Request a Mechanical Oil Seal Quote

SBT manufactures standard and customized mechanical oil seals for industrial machinery, rotating equipment, and OEM production.

Send us your seal dimensions, material, structure, working medium, shaft speed, temperature, pressure, and order quantity. For replacements, you can also send a drawing, part number, or physical sample.

Our team will review your requirements and confirm the suitable structure, material, available specifications, MOQ, and production schedule for your order.

Request a Mechanical Oil Seal Quote


WHY CHOOSE US

Continuous Innovation

Continuous Innovation

Our company has authorized 3 patents, is applying for 8 patents, and passed the Shanghai high-tech achievements transformation project in May 2019

Production Plant

Production Plant

As a manufacturer, we have a standard workshop of 2000 square meters, which has passed the 1SO9001 quality certification and ISO14001 environmental certification

Production Experience

Production Experience

In 12 years of customer service, we have helped thousands of companies with countless solutions to belt problems.

 Strong Logistics Network

Strong Logistics Network

SBT establishes a speed supply chain based on time competition, shortens delivery time, and provides customized logistics supply chain solutions in com- bination with customer needs to reduce costs ...

Are you interested in our products?

You are welcome to call us and we will get back to you within 24 hours

FOUNDED IN 1993

China SBT Oil Seal is an international company integrating design, research and development, production and processing.

No. 68, Hua'an Street, Renze District, Xingtai City, Hebei Province, China

+86 188 0309 4557

info@xtsbt.com

Won many honorary certificates through a number of patented inventions

Copyright @ Xingtai Subote Oil Seal Manufacturing Co., Ltd. All Rights Reserved | Sitemap